CostBuildrBrick Wall Cost Estimation Guide
Brick walls are the single largest material and labor component of grey structure in most Pakistani houses. Knowing the cost per square foot of finished brickwork helps you budget accurately, compare contractor quotes, and make informed decisions between 4.5-inch and 9-inch walls.
Material Cost per Sq Ft of 9-Inch Wall
Materials for 1 sq ft of 9-inch brickwork: 10.5 bricks × PKR 14–18 each = PKR 147–189. Mortar (0.3 cft at 1:4): cement ≈ 0.048 bags × PKR 1,200 = PKR 58; sand 0.24 cft × PKR 5 = PKR 1.2. Total material per sq ft ≈ PKR 206–248.
For a 4.5-inch partition wall, halve the brick quantity (5 per sq ft) and reduce mortar by 55%. Material cost per sq ft of 4.5-inch wall ≈ PKR 110–135. These figures are at 2024–2025 rates and vary by location and supplier.
Labor Cost and Total Rate
Mason labor for brickwork in Pakistan costs PKR 60–100 per sq ft for 9-inch walls (2024–2025 rates), including the mason and helper. Combined material + labor rate: PKR 270–350 per sq ft for 9-inch walls and PKR 170–230 per sq ft for 4.5-inch walls.
For an entire house, multiply net wall area by the combined rate. A typical 5 marla house with 2,500 sq ft of 9-inch wall area would cost PKR 675,000–875,000 for brickwork alone, representing about 18–22% of total grey structure cost.
Cost Comparison: Brick vs Block vs AAC
Concrete blocks (8-inch) cost PKR 250–320 per sq ft installed but are faster to lay, reducing labor time by 30%. AAC (Autoclaved Aerated Concrete) blocks cost PKR 300–380 per sq ft installed but provide better insulation and a lighter structure (reducing column/foundation loads by 20–30%).
For a budget-conscious build, standard brick is still the most economical choice. For time-sensitive projects or multi-story buildings, concrete blocks save enough labor time to offset their higher material cost. AAC makes sense when energy savings from insulation are valued or where structural weight is a concern.
Soalan lazim
What is the cost per square foot of 9-inch brickwork?
Including materials and labor, 9-inch brickwork costs PKR 270–350 per sq ft at 2024–2025 rates in Pakistan. This covers bricks, mortar (cement + sand), and mason + helper labor.
How many bricks for a boundary wall?
A 100 ft long, 6 ft high boundary wall in 9-inch brick = 600 sq ft × 10.5 = 6,300 bricks. Add a 5% waste: 6,615 bricks. For a 4.5-inch wall, use 5 bricks/sq ft = 3,150 + waste = 3,308 bricks.
Is a 4.5-inch wall strong enough for a house?
4.5-inch walls are suitable only for interior partitions, not for exterior or load-bearing walls. Exterior walls and walls supporting roof slabs or upper floors must be 9 inches thick (or have an RCC frame with 4.5-inch infill).